ART SERIES

Specification Sheet

ART 2,35-Zoll-Koaxialchassis (Aluminiummembran)

SV-058C-44-025-0175-01

170–20kHzFrequency Range
80dBSensitivity
4ΩImpedance
15WRated Power

Features2.35-Zoll-Tieftöner mit Aluminium-Konus · 1-Zoll-Seidenkalotten-Membran · Innenliegendes NdFeB-Magnetsystem · Patentierter Sovox ISP Koaxial-Lautsprecher

01General Specification
UnitLFHF
Durchmesser mm∅60.5∅25.9
Nennimpedanz Ω44
Programmleistung [1] W2010
AES-Belastbarkeit [2] W155
Kennschalldruck [3] dB8083
Frequenzbereich HzF0–20k
Schwingspulendurchmesser Zoll26.6225.3
Korbmaterial —Stahlblechkorb
Magnetmaterial —NdFeB
Empfohlene Trennfrequenz [4] Hz2k
Xmax [5] mm1.3—
Verdrängungsvolumen des Chassis L0.04—
03Shipping Information
Nettogewichtkg0.11
Abmessungen pro Stückmm∅60.5×H40
Gewicht Multipackkg—
ART 2,35-Zoll-Koaxialchassis (Aluminiummembran) — SV-058C-44-025-0175-01
Top
ART 2,35-Zoll-Koaxialchassis (Aluminiummembran) — SV-058C-44-025-0175-01
Front
ART 2,35-Zoll-Koaxialchassis (Aluminiummembran) — SV-058C-44-025-0175-01
Side
02LF T/S Parameters [6]
GleichstromwiderstandRe (Ω)3.2
ResonanzfrequenzFs (Hz)174
Bewegte MasseMms (g)2.3
NachgiebigkeitCms (mm/N)0.36
Mechanische VerlusteRms (kg/s)0.78
KraftfaktorBL (N/A)2.77
Mechanische GüteQms3.22
Elektrische GüteQes1.05
GesamtgüteQts0.8
Äquivalentes LuftvolumenVas (L)0.1685
SchwingspuleninduktivitätLe (mH)0.091
MembranflächeSd (cm²)18.1
Referenzwirkungsgradη0 (%)0.08
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.