ART SERIES

Specification Sheet

ART 3-Zoll-Koaxialchassis (Carbonfaser, quadratischer Korb)

SV-078C-44-065-0128-01

128–20kHzFrequency Range
82dBSensitivity
4ΩImpedance
15WRated Power

Features3-Zoll-Tieftöner aus Carbonfaser · 0.75-Zoll-Kalottenhochtöner aus Polymer · Außenliegendes Ferrit-Magnetsystem · Konkave Aufhängung · Patentierter Sovox ISP Koaxial-Lautsprecher

01General Specification
UnitLFHF
Durchmesser mm∅79∅19.7
Nennimpedanz Ω44
Programmleistung [1] W155
AES-Belastbarkeit [2] W103
Kennschalldruck [3] dB8284
Frequenzbereich HzF0–20k
Schwingspulendurchmesser Zoll0.750.75
Korbmaterial —Stahlblechkorb
Magnetmaterial —Ferrit
Empfohlene Trennfrequenz [4] Hz2.5k
Xmax [5] mm1.75—
Verdrängungsvolumen des Chassis L0.117—
03Shipping Information
Nettogewichtkg0.42
Abmessungen pro StückmmL79×W79×H48
Gewicht Multipackkg—
ART 3-Zoll-Koaxialchassis (Carbonfaser, quadratischer Korb) — SV-078C-44-065-0128-01
Top
ART 3-Zoll-Koaxialchassis (Carbonfaser, quadratischer Korb) — SV-078C-44-065-0128-01
Front
ART 3-Zoll-Koaxialchassis (Carbonfaser, quadratischer Korb) — SV-078C-44-065-0128-01
Side
02LF T/S Parameters [6]
GleichstromwiderstandRe (Ω)3.2
ResonanzfrequenzFs (Hz)128
Bewegte MasseMms (g)3.6
NachgiebigkeitCms (mm/N)0.41
Mechanische VerlusteRms (kg/s)0.3
KraftfaktorBL (N/A)2.3
Mechanische GüteQms5.2
Elektrische GüteQes1.6
GesamtgüteQts1.2
Äquivalentes LuftvolumenVas (L)0.5
SchwingspuleninduktivitätLe (mH)0.05
MembranflächeSd (cm²)29.71
Referenzwirkungsgradη0 (%)0.08
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.