ART SERIES

Specification Sheet

ART 6,5-Zoll-Tiefmitteltöner (Aluminiumkorb)

SV-166W-04-120-0050-02

50–8kHzFrequency Range
89dBSensitivity
4ΩImpedance
80WRated Power

Features6.5-Zoll-Tieftöner mit Aluminium-Konus · Magnetsystem mit extrem geringen Verzerrungen · Hoch bedämpfter, resonanzarmer Korb · Hitzebeständige Schwingspule

01General Specification
UnitWert
Durchmesser mm∅181.5
Nennimpedanz Ω4
Programmleistung [1] W80
AES-Belastbarkeit [2] W50
Kennschalldruck [3] dB89
Frequenzbereich HzF0–8kHz
Schwingspulendurchmesser Zoll1.5
Korbmaterial —Leichtmetallkorb
Magnetmaterial —Ferrit
Empfohlene Trennfrequenz [4] Hz2.5KHz
Xmax [5] mm4.15
Verdrängungsvolumen des Chassis L0.839
03Shipping Information
Nettogewichtkg2.18
Abmessungen pro Stückmm∅181.5×H89
Gewicht Multipackkg—
ART 6,5-Zoll-Tiefmitteltöner (Aluminiumkorb) — SV-166W-04-120-0050-02
Top
ART 6,5-Zoll-Tiefmitteltöner (Aluminiumkorb) — SV-166W-04-120-0050-02
Front
ART 6,5-Zoll-Tiefmitteltöner (Aluminiumkorb) — SV-166W-04-120-0050-02
Side
02LF T/S Parameters [6]
GleichstromwiderstandRe (Ω)3.6
ResonanzfrequenzFs (Hz)51
Bewegte MasseMms (g)18.5
NachgiebigkeitCms (mm/N)0.5
Mechanische VerlusteRms (kg/s)2.2
KraftfaktorBL (N/A)8.0
Mechanische GüteQms2.7
Elektrische GüteQes0.3
GesamtgüteQts0.3
Äquivalentes LuftvolumenVas (L)11.0626
SchwingspuleninduktivitätLe (mH)0.09
MembranflächeSd (cm²)122.72
Referenzwirkungsgradη0 (%)0.45
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.