Specification Sheet
PRO 10" Coaxial Speaker Driver
SV-250C-88-156-0050-01
50–20kHzFrequency Range
92dBSensitivity
8ΩImpedance
200WRated Power
Features10-Zoll-Tieftöner mit Papier-Konus · 2-Zoll-Kalottenhochtöner aus Polymer · Außenliegendes Ferrit-Magnetsystem · Basis-Frequenzweiche · Patentierter Sovox ISP Koaxial-Lautsprecher
01General Specification
| Unit | LF | HF | |
|---|---|---|---|
| Diameter | mm | ∅261 | ∅50.2 |
| Nominal impedance | Ω | 8 | 8 |
| Program power [1] | W | 400 | 30 |
| AES power rating [2] | W | 200 | 20 |
| Sensitivity [3] | dB | 92 | 94 |
| Frequency range | Hz | F0–20k | |
| Voice coil diameter | inch | 2.0 | 2.0 |
| Frame material | — | Alloy basket | |
| Magnet material | — | Ferrite | |
| Recommended crossover [4] | Hz | 1k | |
| Xmax [5] | mm | 4.3 | — |
| Driver displacement enclosure | L | 2.6 | — |
03Shipping Information
| Net weight | kg | 4.4 |
| Unit size | mm | ∅261×H151 |
| Multipack weight | kg | — |
02LF T/S Parameters [6]
| DC resistance | Re (Ω) | 7.6 |
| Resonance frequency | Fs (Hz) | 50 |
| Moving mass | Mms (g) | 47 |
| Compliance | Cms (mm/N) | 0.2 |
| Mechanical losses | Rms (kg/s) | 4.8 |
| Force factor | BL (N/A) | 14.8 |
| Mechanical Q-factor | Qms | 2.7 |
| Electrical Q-factor | Qes | 0.52 |
| Total Q-factor | Qts | 0.43 |
| Equivalent air volume | Vas (L) | 38.36 |
| Voice coil Inductance | Le (mH) | 0.6 |
| Diaphragm area | Sd (cm²) | 363.05 |
| Reference efficiency | η0 (%) | 0.9 |
04SPL & Impedance Curve
05Dimensions mm
Test Notes
- Program power is defined as 3 dB greater than AES power.
- Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
- Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
- High-pass filter with slope 12 dB/oct. or higher.
- Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
- Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.