PRO SERIES

Specification Sheet

PRO 12-Zoll-Koaxialchassis

SV-300C-44-165-0045-02

50–20kHzFrequency Range
92dBSensitivity
4ΩImpedance
200WRated Power

Features12-Zoll-Tieftöner mit Papier-Konus · 2-Zoll-Kalottenhochtöner aus Polymer · Außenliegendes Ferrit-Magnetsystem · Basis-Frequenzweiche · Patentierter Sovox ISP Koaxial-Lautsprecher

01General Specification
UnitLFHF
Durchmesser mm∅305∅50.2
Nennimpedanz Ω44
Programmleistung [1] W40030
AES-Belastbarkeit [2] W20020
Kennschalldruck [3] dB9290
Frequenzbereich HzF0–20k
Schwingspulendurchmesser mm∅50.9∅49.2
Korbmaterial Stahlblechkorb
Magnetmaterial Ferrit
Empfohlene Trennfrequenz [4] Hz1.5k
Xmax [5] mm4.3
Verdrängungsvolumen des Chassis L4.35
03Shipping Information
Nettogewichtkg4.38
Abmessungen pro Stückmm∅306×H167
Gewicht Multipackkg
PRO 12-Zoll-Koaxialchassis — SV-300C-44-165-0045-02
Top
PRO 12-Zoll-Koaxialchassis — SV-300C-44-165-0045-02
Front
PRO 12-Zoll-Koaxialchassis — SV-300C-44-165-0045-02
Side
02LF T/S Parameters [6]
GleichstromwiderstandRe (Ω)3.5
ResonanzfrequenzFs (Hz)50
Bewegte MasseMms (g)49
NachgiebigkeitCms (mm/N)0.17
Mechanische VerlusteRms (kg/s)3.3
KraftfaktorBL (N/A)11.1
Mechanische GüteQms4.96
Elektrische GüteQes0.49
GesamtgüteQts0.45
Äquivalentes LuftvolumenVas (L)68.86
SchwingspuleninduktivitätLe (mH)0.4
MembranflächeSd (cm²)522.79
Referenzwirkungsgradη0 (%)2
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.