PRO SERIES

Specification Sheet

Motor de compresión PRO de 3"

SV-078H-06-165-0450-01

850Hz–20kHzFrequency Range
101dBSensitivity
6ΩImpedance
80WRated Power

FeaturesAltavoz de alta frecuencia de 3 pulgadas · Domo de titanio · Bobina móvil resistente al calor

01General Specification
UnitValor
Diámetro mmΦ165
Impedancia nominal Ω6
Potencia de programa [1] W80
Potencia nominal AES [2] W50
Sensibilidad [3] dB101
Rango de frecuencia HzF0–20kHz
Diámetro de la bobina móvil pulgadas3
Material del chasis Chasis de aluminio
Material del imán Ferrita
Frecuencia de corte recomendada [4] Hz2KHz
Xmax [5] mm2.8
Volumen desplazado por el altavoz L0.98
03Shipping Information
Peso netokg4.4
Tamaño de la unidadmm∅165×H64
Peso del multipackkg
Motor de compresión PRO de 3" — SV-078H-06-165-0450-01
Top
Motor de compresión PRO de 3" — SV-078H-06-165-0450-01
Front
Motor de compresión PRO de 3" — SV-078H-06-165-0450-01
Side
02LF T/S Parameters [6]
Resistencia DCRe (Ω)
Frecuencia de resonanciaFs (Hz)
Masa móvilMms (g)
ComplianciaCms (mm/N)
Pérdidas mecánicasRms (kg/s)
Factor de fuerzaBL (N/A)
Factor Q mecánicoQms
Factor Q eléctricoQes
Factor Q totalQts
Volumen de aire equivalenteVas (L)
Inductancia de la bobina móvilLe (mH)
Área del diafragmaSd (cm²)
Eficiencia de referenciaη0 (%)
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.