ART SERIES

Specification Sheet

ART 2.35" Coaxiale luidsprekerdriver (aluminium conus)

SV-058C-44-025-0175-01

170–20kHzFrequency Range
80dBSensitivity
4ΩImpedance
15WRated Power

Features2.35-inch woofer met aluminium conus · 1-inch zijden domemembraan · Ingebouwd NdFeB-magneetsysteem · Sovox ISP gepatenteerde coaxiale luidspreker

01General Specification
UnitLFHF
Diameter mm∅60.5∅25.9
Nominale impedantie Ω44
Programmavermogen [1] W2010
AES-vermogen [2] W155
Gevoeligheid [3] dB8083
Frequentiebereik HzF0–20k
Spreekspoeldiameter inch26.6225.3
Korfmateriaal —Stalen korf
Magneetmateriaal —NdFeB
Aanbevolen crossover [4] Hz2k
Xmax [5] mm1.3—
Verdrongen volume driver L0.04—
03Shipping Information
Nettogewichtkg0.11
Afmetingen per stukmm∅60.5×H40
Gewicht multipackkg—
ART 2.35" Coaxiale luidsprekerdriver (aluminium conus) — SV-058C-44-025-0175-01
Top
ART 2.35" Coaxiale luidsprekerdriver (aluminium conus) — SV-058C-44-025-0175-01
Front
ART 2.35" Coaxiale luidsprekerdriver (aluminium conus) — SV-058C-44-025-0175-01
Side
02LF T/S Parameters [6]
GelijkstroomweerstandRe (Ω)3.2
ResonantiefrequentieFs (Hz)174
Bewegende massaMms (g)2.3
CompliantieCms (mm/N)0.36
Mechanische verliezenRms (kg/s)0.78
KrachtfactorBL (N/A)2.77
Mechanische Q-factorQms3.22
Elektrische Q-factorQes1.05
Totale Q-factorQts0.8
Equivalent luchtvolumeVas (L)0.1685
SpreekspoelinductantieLe (mH)0.091
MembraanoppervlakSd (cm²)18.1
Referentierendementη0 (%)0.08
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.