PRO SERIES

Specification Sheet

PRO 5.25" Coaxiale luidsprekerdriver

SV-135C-44-100-0055-01

55–20kHzFrequency Range
87dBSensitivity
4ΩImpedance
50WRated Power

Features5.25-inch woofer met wolvezelconus · 1.25-inch dometweeter van polymeer · Extern ferrietmagneetsysteem · Sovox ISP gepatenteerde coaxiale luidspreker

01General Specification
UnitLFHF
Diameter mm∅148∅29.7
Nominale impedantie Ω44
Programmavermogen [1] W5010
AES-vermogen [2] W305
Gevoeligheid [3] dB8687
Frequentiebereik HzF0–20k
Spreekspoeldiameter inch1.21.2
Korfmateriaal —Stalen korf
Magneetmateriaal —Ferriet
Aanbevolen crossover [4] Hz1k
Xmax [5] mm4.1—
Verdrongen volume driver L0.453—
03Shipping Information
Nettogewichtkg1.38
Afmetingen per stukmm∅148×H80
Gewicht multipackkg—
PRO 5.25" Coaxiale luidsprekerdriver — SV-135C-44-100-0055-01
Top
PRO 5.25" Coaxiale luidsprekerdriver — SV-135C-44-100-0055-01
Front
PRO 5.25" Coaxiale luidsprekerdriver — SV-135C-44-100-0055-01
Side
02LF T/S Parameters [6]
GelijkstroomweerstandRe (Ω)3.2
ResonantiefrequentieFs (Hz)55
Bewegende massaMms (g)11.3
CompliantieCms (mm/N)0.55
Mechanische verliezenRms (kg/s)1.2
KrachtfactorBL (N/A)6.6
Mechanische Q-factorQms4.5
Elektrische Q-factorQes0.4
Totale Q-factorQts0.35
Equivalent luchtvolumeVas (L)7.9
SpreekspoelinductantieLe (mH)0.28
MembraanoppervlakSd (cm²)100.29
Referentierendementη0 (%)0.31
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.