PRO SERIES

Specification Sheet

PRO 8" Coaxiale luidsprekerdriver

SV-200C-66-135-0040-01

40–20kHzFrequency Range
90dBSensitivity
6ΩImpedance
150WRated Power

Features8-inch woofer met wolvezelconus · 1.5-inch dometweeter van polymeer · Extern ferrietmagneetsysteem · Sovox ISP gepatenteerde coaxiale luidspreker

01General Specification
UnitLFHF
Diameter mm∅220∅37.6
Nominale impedantie Ω66
Programmavermogen [1] W15030
AES-vermogen [2] W10020
Gevoeligheid [3] dB9090
Frequentiebereik HzF0–20k
Spreekspoeldiameter inch1.51.5
Korfmateriaal —Stalen korf
Magneetmateriaal —Ferriet
Aanbevolen crossover [4] Hz1k
Xmax [5] mm2.1—
Verdrongen volume driver L1.868—
03Shipping Information
Nettogewichtkg2.8
Afmetingen per stukmm∅220×H132.5
Gewicht multipackkg—
PRO 8" Coaxiale luidsprekerdriver — SV-200C-66-135-0040-01
Top
PRO 8" Coaxiale luidsprekerdriver — SV-200C-66-135-0040-01
Front
PRO 8" Coaxiale luidsprekerdriver — SV-200C-66-135-0040-01
Side
02LF T/S Parameters [6]
GelijkstroomweerstandRe (Ω)6.0
ResonantiefrequentieFs (Hz)40
Bewegende massaMms (g)37.5
CompliantieCms (mm/N)0.4
Mechanische verliezenRms (kg/s)2.3
KrachtfactorBL (N/A)10.7
Mechanische Q-factorQms4.2
Elektrische Q-factorQes0.5
Totale Q-factorQts0.45
Equivalent luchtvolumeVas (L)26.3
SpreekspoelinductantieLe (mH)0.37
MembraanoppervlakSd (cm²)213.82
Referentierendementη0 (%)0.33
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.