PRO SERIES

Specification Sheet

PRO 3" Compression Driver

SV-078H-06-165-0450-01

850Hz–20kHzFrequency Range
101dBSensitivity
6ΩImpedance
80WRated Power

Features3 inch High-frequency Driver · Titanium dome · Heat-resistant Voice Coil

01General Specification
UnitValue
Diameter mmΦ165
Nominal impedance Ω6
Program power [1] W80
AES power rating [2] W50
Sensitivity [3] dB101
Frequency range HzF0–20kHz
Voice coil diameter inch3
Frame material Aluminum basket
Magnet material Ferrite
Recommended crossover [4] Hz2KHz
Xmax [5] mm2.8
Driver displacement enclosure L0.98
03Shipping Information
Net weightkg4.4
Unit sizemm∅165×H64
Multipack weightkg
PRO 3" Compression Driver — SV-078H-06-165-0450-01
Top
PRO 3" Compression Driver — SV-078H-06-165-0450-01
Front
PRO 3" Compression Driver — SV-078H-06-165-0450-01
Side
02LF T/S Parameters [6]
DC resistanceRe (Ω)
Resonance frequencyFs (Hz)
Moving massMms (g)
ComplianceCms (mm/N)
Mechanical lossesRms (kg/s)
Force factorBL (N/A)
Mechanical Q-factorQms
Electrical Q-factorQes
Total Q-factorQts
Equivalent air volumeVas (L)
Voice coil InductanceLe (mH)
Diaphragm areaSd (cm²)
Reference efficiencyη0 (%)
04SPL & Impedance Curve
SPL and impedance curve
Measured with KLIPPEL equipment, on baffle, in Sovox's full-scale anechoic chamber.
05Dimensions mm
dimension drawing

Test Notes

  1. Program power is defined as 3 dB greater than AES power.
  2. Tested in free air for two hours using a continuous band-limited pink noise signal as per AES 2-1984 Rev. 2003.
  3. Measured on axis at 2 V, 1 m; SPL is the average at 200, 500, 800 and 1000 Hz.
  4. High-pass filter with slope 12 dB/oct. or higher.
  5. Xmax = (Hvc − Hg) / 2, where Hvc is voice-coil height and Hg the gap height.
  6. Thiele-Small parameters measured after preconditioning (20–22 °C, 50% RH, 2 h) by Klippel LSI. All specifications subject to change without notice.