2 ทาง · พาสซีฟ

นโยบายการจัดส่ง · นโยบายทางกฎหมาย
MV2250
ลำโพงหลักหลังจอสำหรับโรงภาพยนตร์
Integrated พาสซีฟ two-way screen-channel loudspeaker with dual 15-inch woofers, for behind-screen main-channel use, multiplex, screening and dubbing rooms. ความลึกของโรงภาพยนตร์ ≤ 26 m/37 m1
การตอบสนองความถี่47 Hz – 19 kHz±3 dB @ 2π
มุมกระจายเสียง90° × 40°H × V
ระบบ2 ทาง · พาสซีฟ129.8 dB SPL สูงสุดพิกัด @ 1 ม., 2π
ความลึกของโรงภาพยนตร์≤ 26 m/37 mกำลังขับต่อเนื่อง / โปรแกรม
การใช้งาน
Behind-screen main channels · Medium to large commercial โรงภาพยนตร์s · Large-format screens
01
คุณลักษณะเด่น
ประสิทธิภาพ
- Dual 15-inch woofers with ADM™ oil-treated cloth-edge paper cones provide ample low-frequency radiating area and output capacity.
- 3-inch compression driver handles high-output reproduction through the upper band.
วิศวกรรม
- Integrated horn provides 90° × 40° nominal coverage across the principal seating area.
- Internal 1.8 kHz พาสซีฟ crossover allows full-range operation from a single amplifier channel.
- The 4-ohm nominal load requires amplifier current capability, cable gauge and protection settings to be verified during system design.
ความคุ้มค่าและการบำรุงรักษา
- 380 mm cabinet depth in a one-piece 46 kg พาสซีฟ enclosure — no module handling or assembly, easy installation behind acoustically transparent screens.
02
ภาพรวม
MV2250 คือลำโพงหลักหลังจอ 2 ทางแบบพาสซีฟตู้เดี่ยว พร้อมดอกวูฟเฟอร์ 15 นิ้วคู่
มอบความดันเสียงและพลังขับที่สูงขึ้นสำหรับโรงภาพยนตร์ขนาดกลาง
03
ข้อมูลจำเพาะ
| ประเภทผลิตภัณฑ์ | ลำโพงหลักหลังจอสำหรับโรงภาพยนตร์ |
|---|---|
| ประเภทระบบ | 2 ทาง · พาสซีฟ |
| การจัดวางดอกลำโพง | 15" LF × 2 + 3" HF × 1 |
| ความต้านทานระบุ | 4Ω |
| การตอบสนองความถี่ (±3 dB @ 2π)2 | 47 Hz–19 kHz |
| ช่วงความถี่ใช้งาน (-10 dB @ 2π)2 | 37 Hz–20 kHz |
| กำลังขับ AES 100 ชั่วโมง3 | 750W |
| กำลังขับ AES 2 ชั่วโมง | 937.5W |
| กำลังขับโปรแกรม4 | 1500W |
| ความไว (2π) @1 W/1 m | 101dB |
| ระดับความดันเสียงสูงสุดระบุ /1 m @ 2π | 129.8dB |
| ระดับความดันเสียงสูงสุดจากการคำนวณ /1 m @ 2π5 | 135.8dB |
| ความถี่ตัดข้ามครอสโอเวอร์ | 1.8 kHz |
| ฟิลเตอร์กรองความถี่สูงที่แนะนำ (HPF) | 30 Hz, LR24 |
| มุมกระจายเสียง (แนวนอน × แนวตั้ง) | 90° × 40° |
| ประเภทตู้ลำโพง | ตู้เปิดแบบเบสรีเฟล็กซ์ |
| วัสดุตู้ลำโพง / พื้นผิวสัมผัส | MDF · ลามิเนต PVC |
| ขั้วต่ออินพุต | ขั้วต่อไบนดิงโพสต์ |
| ตัวเลือกการติดตั้ง | Behind an acoustically transparent screen |
| ขนาด ก×ส×ล (mm) | W650 × H1173 × D380 mm |
| น้ำหนักสุทธิ | 46 kg |
04
การตอบสนองความถี่

05
มิติขนาด



กว้าง × สูง × ลึก · น้ำหนักสุทธิW650 × H1173 × D380 mm · 46 kg
- 1Two length values are given: the first is the usable range on continuous power, the second on program power. Program power is a short-term maximum output and is not a level the system can sustain continuously. Target levels follow the SMPTE ST 202 / RP 200 cinema reference level: 85 dB for screen channels plus 20 dB peak headroom, measured at the reference listening position (RLP); hall depth = listening distance x 1.5. Listening distance is derived from free-field distance attenuation. The continuous-power range uses the rated maximum SPL in this table; the program-power range uses the rated value +3 dB (program power being twice the continuous power). The calculated maximum SPL (rated +6 dB, short-term peak) is not used for these figures. Screen loss, power compression, system limiting and room gain are not included - this is a theoretical estimate, not a measured guarantee; on-site verification is recommended. Operating beyond the recommended figure may result in, but is not limited to: dynamic compression, increased distortion, extraneous noise, and in severe cases equipment damage.
- 2การตอบสนองความถี่และระดับความดันเสียงวัดภายใต้สภาวะครึ่งทรงกลม (2π) ตามมาตรฐานโรงภาพยนตร์ ค่าที่วัดภายใต้สภาวะอื่นอาจแตกต่างกันออกไป
- 3Rating based on an IEC filtered random-noise test signal, band-limited 50 Hz–20 kHz, with a peak-to-average ratio of 6 dB
- 4Recommended amplifier output at the applicable impedance should not exceed the program power, giving an unclipped output waveform while avoiding loudspeaker damage; an amplifier capable of at least the RMS continuous power (AES 100 h) is recommended to realize full loudspeaker performance. The actual amplifier match should be determined by calculation for the listening distance (see note 1).
- 5การตอบสนองความถี่และระดับความดันเสียงวัดภายใต้สภาวะครึ่งทรงกลม (2π) ตามมาตรฐานโรงภาพยนตร์ ค่าที่วัดภายใต้สภาวะอื่นอาจแตกต่างกันออกไป
- 6การตอบสนองความถี่และระดับความดันเสียงวัดภายใต้สภาวะครึ่งทรงกลม (2π) ตามมาตรฐานโรงภาพยนตร์ ค่าที่วัดภายใต้สภาวะอื่นอาจแตกต่างกันออกไป





