
MC312
ลำโพงเซอร์ราวด์สำหรับโรงภาพยนตร์
Three-way coaxial surround loudspeaker for the side- and rear-wall channels, with a 12-inch coaxial mid-high section and ribbon super-tweeters on a common axis, radiating laterally across the seating area, with aim-adjustable wall mounting and height-channel suspension. ความกว้างของโรงภาพยนตร์ ≤ 18 m/25 m
122 dB
คุณลักษณะเด่น
- 12-inch coaxial mid/high driver and 2-inch dome tweeter on one axis, spreading energy laterally along the side and rear walls.
- Two ribbon super-tweeters extend the ultra-high band further, with HF response to 25 kHz.
- 100° × 100° nominal coverage, identical in wall-mount and flown configurations.
- 2.5 kHz / 4.5 kHz พาสซีฟ crossover inside the enclosure, so only one connection point is needed.
- U-shaped one-piece bracket adjusts horizontally; wall-mounted directly or suspended on threaded rods as a height channel.
- 4 Ω nominal; verify amplifier current capability and cable loss when specifying the amplifier; 14.6 kg, 319 mm deep.
ภาพรวม
The MC312 is a three-way coaxial surround loudspeaker in the MC Series for the แชนเนลผนังข้างและผนังหลัง of wider seating areas, suitable for wall or ceiling mounting, and for ceiling suspension on threaded rods as a height channel for immersive formats such as Dolby Atmos. It combines a 12″ coaxial mid-high driver, a 2″ dome HF section and two ribbon super-tweeters, delivering 52 Hz–25 kHz (±3 dB) and 100° × 100° nominal coverage from a 319 mm deep bass-reflex enclosure.
The 12″ coaxial unit places the mid and high sections on one axis, with the two ribbon super-tweeters carrying the upper band. The 4 Ω nominal impedance governs how many cabinets can share one channel and the cable size required; amplifier current and cable loss must still be checked. At 96 dB sensitivity and a 310 W AES 100-hour rating it is the higher-output member of the family within the same cabinet size. The U-shaped bracket provides horizontal aiming for direct side-wall mounting or ceiling suspension; the bass-reflex MDF cabinet carries a textured paint finish and weighs 14.6 kg net.
ข้อมูลจำเพาะ
| ประเภทผลิตภัณฑ์ | ลำโพงเซอร์ราวด์สำหรับโรงภาพยนตร์ |
|---|---|
| ประเภทระบบ | โคแอกเชียล 3 ทาง · พาสซีฟ |
| การจัดวางดอกลำโพง | 12"coaxial +2“ HF dome + Ribbon UHF × 2 |
| ความต้านทานระบุ | 4Ω |
| การตอบสนองความถี่ (±3 dB @ 2π)2 | 52 Hz–25 kHz |
| ช่วงความถี่ใช้งาน (-10 dB @ 2π)2 | 45 Hz–25 kHz |
| กำลังขับ AES 100 ชั่วโมง3 | 310W |
| กำลังขับ AES 2 ชั่วโมง | 387.5W |
| กำลังขับโปรแกรม4 | 620W |
| ความไว (2π) @1 W/1 m | 96dB |
| ระดับความดันเสียงสูงสุดระบุ /1 m @ 2π | 120.9dB |
| ระดับความดันเสียงสูงสุดจากการคำนวณ /1 m @ 2π5 | 126.9dB |
| ความถี่ตัดข้ามครอสโอเวอร์ | 2.5 kHz 4.5 kHz |
| ฟิลเตอร์กรองความถี่สูงที่แนะนำ (HPF) | 40 Hz |
| มุมกระจายเสียง (แนวนอน × แนวตั้ง) | 100°×100° |
| ประเภทตู้ลำโพง | ตู้เปิดแบบเบสรีเฟล็กซ์ |
| วัสดุตู้ลำโพง / พื้นผิวสัมผัส | MDF · Textured paint |
| ขั้วต่ออินพุต | ขั้วต่อไบนดิงโพสต์ |
| ตัวเลือกการติดตั้ง | Wall / ceiling |
| ขนาด ก×ส×ล (mm) | W406 × H487 × D319 mm |
| น้ำหนักสุทธิ | 14.6 kg |
การตอบสนองความถี่

มิติขนาด



- 1Two length values are given: the first is the usable range on continuous power, the second on program power. Program power is a short-term maximum output and is not a level the system can sustain continuously. Target levels follow the SMPTE ST 202 / RP 200 cinema reference level: 82 dB for surround plus 20 dB peak headroom; hall width = lateral distance from the loudspeaker to the hall centre axis x 2. Listening distance is derived from free-field distance attenuation. The continuous-power range uses the rated maximum SPL in this table; the program-power range uses the rated value +3 dB (program power being twice the continuous power). The calculated maximum SPL (rated +6 dB, short-term peak) is not used for these figures. Screen loss, power compression, system limiting and room gain are not included - this is a theoretical estimate, not a measured guarantee; on-site verification is recommended. Operating beyond the recommended figure may result in, but is not limited to: dynamic compression, increased distortion, extraneous noise, and in severe cases equipment damage.
- 2การตอบสนองความถี่และระดับความดันเสียงวัดภายใต้สภาวะครึ่งทรงกลม (2π) ตามมาตรฐานโรงภาพยนตร์ ค่าที่วัดภายใต้สภาวะอื่นอาจแตกต่างกันออกไป
- 3Rating based on an IEC filtered random-noise test signal, band-limited 50 Hz–20 kHz, with a peak-to-average ratio of 6 dB
- 4Recommended amplifier output at the applicable impedance should not exceed the program power, giving an unclipped output waveform while avoiding loudspeaker damage; an amplifier capable of at least the RMS continuous power (AES 100 h) is recommended to realize full loudspeaker performance. The actual amplifier match should be determined by calculation for the listening distance (see note 1).
- 5การตอบสนองความถี่และระดับความดันเสียงวัดภายใต้สภาวะครึ่งทรงกลม (2π) ตามมาตรฐานโรงภาพยนตร์ ค่าที่วัดภายใต้สภาวะอื่นอาจแตกต่างกันออกไป
- 6การตอบสนองความถี่และระดับความดันเสียงวัดภายใต้สภาวะครึ่งทรงกลม (2π) ตามมาตรฐานโรงภาพยนตร์ ค่าที่วัดภายใต้สภาวะอื่นอาจแตกต่างกันออกไป
- 7Passive, single-amplifier-channel enclosure; hall width above derived from its AES 100-hour rating and system sensitivity, with drive-unit-level verification pending.





